Real Metal Detectors

[Morgan]

Industrial metal detector ?

I will share my search list and what areas I have been looking for , and what I am Looking for NOW !! Since I do not know when to Quit !!!! I will be looking again tonight !! A lot of "Look and Looking" words

Names of companies I have checked and I will re-check again Tonight:

1.Thermo electron / Ramsey , Mining and Engineering
2. Allen
3. Loma
4. Eries
5. Icor
6. Cintex

So , food processing metal detection companies, medical applications , restuarant applications like silverware retrieval . And finally one big area which I have only checked once , was military applications. When we do find this product information , it will be a Great potential Project to build later , or just learn from the design. We are completely safe to Proceed , Do you know Why????? Because the " ANONYMOUS" people who made this, Do not care about copyrights , or the company name would be posted all over the plastic box , the PCB Board and the search-coil !!! OOPS , Where is the search-coil ?????? Thanks again to all the members who are trying so hard , Like they always do , just to help others when they need it...............Eugene

LPS equipment & acquisition co.
Metal Detectors,Scanners.
MDL 240 (metal detector)

I found this,but i think as nothing to do with MDL8500 Pulse Induction...

[amtech2005]

Real Metal Detectors

Hello again , The two things that bother me. 1. Where is the Search-Coil ??
2. Where is the chest or shoulder strap ?????

I looked again last night in the areas of Walk-Through metal detection. And looked again at Food Processing. Some more Manufacturers here :
1. Vallon
2. Metron
3. Stone
4. Autoclear
5. Metalarm
6. Eztec
7. Nonin

I think this was a "Cloned P.I." And then the company Dissappeared very fast !! The answer is in the white plastic "ATTENTION" box........Thanks all
..............Eugene

[Great_Alex]

I'm sure it's not ClonePI . Clone PI is very weak MD and is totally different . it has some discrimination but MDL working in all metal mode.

michael already describe that he use of universal coil 2*2 .

[amtech2005]

Real Metal Detectors

Great Alex , This P.I. machine was [Cloned] , "COPIED from another Manufacturer !!!!!!!!!! It is not Original work . Sorry for mistake , I did not type accurately Have a Good Day !!!!! Eugene

[olympios]

Great Alex , This P.I. machine was [Cloned] , "COPIED from another Manufacturer !!!!!!!!!! It is not Original work . Sorry for mistake , I did not type accurately Have a Good Day !!!!! Eugene

You are probably right. There are, however, some questions about that. Why did they scratch off the labels from the chips? Probably because they didn't want people to copy/clone their work. If the unit was a clone, why would they bother erasing the chip identification? Just... something to think about.

[Great_Alex]

MDL
but i meant this is not the clonePI not clone a PI MD.

http://www.md4u.ru/?page=pimd&lang=en

[Max]

You are probably right. There are, however, some questions about that. Why did they scratch off the labels from the chips? Probably because they didn't want people to copy/clone their work. If the unit was a clone, why would they bother erasing the chip identification? Just... something to think about.

to avoid other people clone it again and at lower costs ?

E.g. suppose, as example, device was cloned in Bulgaria from an USA made industrial detector... then some chinese factory wanna replicate it too... do you think it will sell as before at bulgarian price ?

No. The chinese lower production costs per unit will bust any bulgarian production and business.

In the MD world nothing is impossible !

That's why I think they removed the labels: chinese factories could scare any manifacturer... even cloners that produce at lower costs than original brand!

Kind regards,
Max

[Qiaozhi]

Hi Qiaozhi,
This could be 2 different things (?):
"This device is repairable by experts "
and :
"This device should not be applied by unskilled person."
or not?

The last sentence still doesn't make sense. "...not be applied...?".

Here i respectfully, but completely disagree .The detector could not work if it was only a DC/DC converter.The LCD control, timing and signal processing are done there.

OK ... you're probably correct, as there's no circuitry to drive the LCD otherwise.

Michael - if you tap the top of the white box, does it sound hollow, or do you think it's full of potting compound?

[Fred]

The last sentence still doesn't make sense. "...not be applied...?".

Ok,i was asking because i made a search on the exact phrase and found results, all related to research.I understood applied as "used".

regards,
Fred.

[panzerfaust]

MDL8500

Hi,

Does anybody have seen this writing on the white box: "hight voltaje" instead of "voltage"
This mistake seems to be Spanish language, isnt'it?

Regards.

[amtech2005]

Real Metal Detectors

Hello Fred and everyone , I am hoping that Michael comes back and posts a bunch of "NEW PHOTOS" , with photos of the search-coil and also the battery pack and its connecting harness !!! What if this detector is only available in EUROPE Or South America , Spain??????? Yes I just saw your post Panzerfaust !!! How can we research all the other Foreign countries ??? This will be my next step , I will quit searching U.S. companies !!!!.................Eugene

[Fred]

Hi,
Does anybody have seen this writing on the white box: "hight voltaje" instead of "voltage"
This mistake seems to be Spanish language, isnt'it?
Regards.

Amazing!
Now we can be sure all this "USA" stuff etc is BS....
regards,
Fred.

[Qiaozhi]

Hi,

Does anybody have seen this writing on the white box: "hight voltaje" instead of "voltage"
This mistake seems to be Spanish language, isnt'it?

Regards.

That's really interesting. I downloaded the image and zoomed-in. Although it's difficult to be sure, it certainly looks like "voltaje".
I must admit that I've been tempted to suggest that this was actually manufactured in South America, but thought everyone might laugh. Now it seems to be a possibility.

[Max]

That's really interesting. I downloaded the image and zoomed-in. Although it's difficult to be sure, it certainly looks like "voltaje".
I must admit that I've been tempted to suggest that this was actually manufactured in South America, but thought everyone might laugh. Now it seems to be a possibility.

Hi,
yes... that's my idea too looking at the wrong labels work... but sure I haven't any proof of that.

I had 2 alternative places/zones theories: south america and places like e.g. turkey or bulgaria + some other few middle east countries.

Probably is a cloned industrial device, derived from a conveyor mounted stuff... or similar like the ones used in australian mines both to avoid pieces of machinery goes down the mineral flow and to detect possible e.g. nuggets and the like...gold recovery from big flux of other minerals like bauxite or iron related ores. Also food industry stuff could be used but it's more probable it was some mine related equipment I think, microcontroller based.
Some of these are very powerful... cause they must operate in worse conditions of detecting... using fairly large amount of power and most of them (if not all today) are PI kind.

If it's from south america, the term "voltaje" for "voltage" could be both from spanish or purtugese language country, including Brazil and Paraguay...

How many possibility it's another Mineoro !?

Mineoro Deepest Locator 8500 ?

if I remember well... Hung told us they made also industrial detectors...

maybe tempted of replicating the impossible they decided to convert an industrial MD to something else...with success !

Kind regards,
Max

[Fred]

If it's from south america, the term "voltaje" for "voltage" could be both from spanish or purtugese language country, including Brazil and Paraguay...
How many possibility it's another Mineoro !? Max

Hi,
Aparently only Spanish, not Portuguese,so this exclude Brazil...All other South American countries and Spain left as possible...
Maybe Mexicans working in a USA university ?
Fred.