Announcement

Collapse
No announcement yet.

Security detector

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Security detector

    Did any of you guys have seen inside this device?
    Attached Files

  • #2
    Originally posted by strujas View Post
    Did any of you guys have seen inside this device?
    I think Carl may have one of these.

    Comment


    • #3
      Originally posted by strujas View Post
      Did any of you guys have seen inside this device?
      Maybe you have it now in your @gmail

      Comment


      • #4
        Indeed, Santa Claus was there before Xmas

        Comment


        • #5
          Originally posted by strujas View Post
          Indeed, Santa Claus was there before Xmas
          Sometimes, Santa Claus work during the year!

          Comment


          • #6
            I'l got this, some values are missing and parts are for Russian market. What to use for replaceing?
            Enybody know?
            Attached Files

            Comment


            • #7
              Originally posted by strujas View Post
              I'l got this, some values are missing and parts are for Russian market. What to use for replaceing?
              Enybody know?
              Hi,
              I think the circuit is not critical.

              Instead of "&" use a CD4093, quad nand gates.
              At 561 use a 4016 or 4066.
              At KPEH5A use a 7805.
              For op amp I think you could use e.g. TL081 and TL074... similar would work too I think. I would use LS404 at quad op amp... but just cause I have many of these.

              At transistors use e.g. BC547/BC548 or say 2n2222 and 2n2907.

              Kind regards,
              Max

              Comment


              • #8
                What with resistor on 3-rd leg of 7805?, and diodes??

                Comment


                • #9
                  a mistake. deleted. diod is 1N4148.

                  Comment


                  • #10
                    all diodes are 4148?, that resistor should not be in schematic?. I have idea to add vibro and little dd coil instead ferite inside , and make water proof to use when i am diving.

                    Comment

                    Working...
                    X