Tweet
Could anyone help me please with the voltage specs of the toggle switch on the Euro sabre.The switch i need the info on is the following.
It's the; Iron Blank-Off-Iron I/D ,3 locking postion toggle
I enquired about a switch from a wholesaler,ad was given this reply
Thank you for your enquiry.
the function is the same however you have not advised what voltage is the original switch and if the positions are momentary or latching. The switch we sell is a latching switch which means it does not spring back into the off position once you take your hand off the switch and rated at 250v ac. If this is the same then you can look at this product as a possible alternative.
If you require any further details, documents or advice please do not hesitate to contact our Technical Helpline.
Yours Sincerely
This is my switch
Many thanks for any help you can give
Ash
It's the; Iron Blank-Off-Iron I/D ,3 locking postion toggle
I enquired about a switch from a wholesaler,ad was given this reply
Thank you for your enquiry.
the function is the same however you have not advised what voltage is the original switch and if the positions are momentary or latching. The switch we sell is a latching switch which means it does not spring back into the off position once you take your hand off the switch and rated at 250v ac. If this is the same then you can look at this product as a possible alternative.
If you require any further details, documents or advice please do not hesitate to contact our Technical Helpline.
Yours Sincerely
This is my switch
Many thanks for any help you can give
Ash
Comment