VLF Connector

[Molzar]

Hi,

Saw these connectors posted by Max:

http://www.maplin.co.uk/Search.aspx?...y%20Connectors

These look good but could not find these in USA. Found others but very much $$$$$$

Finally found at Radio shack:Plug $4

http://www.radioshack.com/product/in...entPage=search

and Jack $4

http://www.radioshack.com/product/in...entPage=search

They had a local store, 4 pin only but should be good for most VLFs. Good quality part.

Make sure a look in component draw, sale people don't some times know where these are.

Molzar

[eclipse]

Using absolutely the same connectors here, 1$ each

[simonbaker]

inline?

If anyone knows of similar low-cost "inline" connector I'd like to find one for trying different coils with Tesoro Compadre (hard wired).

-Regards,

SB

[Alexismex]

Yes it is a very good option connector for coil , I use it from years ,if you search a little in the net you will find very cheap 1,2Dlls...
For the power supply if you have external ,i used Cannon microphone plug and base , very strong and good connector
Have a good day
alexis

[gef12]

Yes it is a very good option connector for coil , I use it from years ,if you search a little in the net you will find very cheap 1,2Dlls...
For the power supply if you have external ,i used Cannon microphone plug and base , very strong and good connector
Have a good day
alexis

If you can get the gold plated version would be better...
specially if using for the PI machines
cheers

[Götz von Berlichingen]

The good old Neutrik XLR Connectors should work, too.
These are used for stage Microphones (symmetric) and DMX Light control.
Not cheap, but very common and fine quality.

http://www.neutrik.com/us/en/audio/2...?title=NC3FX-B