Chinametaldetectors.com

[ivconic]

http://www.chinametaldetectors.com/T...al%20Detector/

There are very interesting products here, on this page.
I am looking forward to get and test some of these devices.
Any experiences?
Personally i am interested in TC serie..

[Patrick]

Strange.

Main Specification

Maximum depth of detection: 1.5 M
Operate mode:“ground Balance ”/ “Discriminate ”
Oscillate frequency: 460.18KHZ+/–2KHZ
Power consumption: 450HZ+/–10HZ
Power consumption: 0.6W
Power supply: 9V DC

[Götz von Berlichingen]

This one is even better : http://www.chinametaldetectors.com/T...SE%20AR%20III/

Note the "Member Price"

And this one :

Scanmaster 1550 and 1550Quad
To explain the basic concept of the Omnitron scanners, one must first understand some very important basic facts. Instrumentation implementing electromagnetic induction, RF induction, and gamma wave transmissions were thoroughly tested.

Omnitron ? Did they Clone one of Dells Machines ?

[kt315]

Strange.

Main Specification

Maximum depth of detection: 1.5 M
Operate mode:“ground Balance ”/ “Discriminate ”
Oscillate frequency: 460.18KHZ+/–2KHZ
Power consumption: 450HZ+/–10HZ
Power consumption: 0.6W
Power supply: 9V DC

what is the strange? the schematic has 460 kHz ceramic quarth generator and divider CD4060. very nice decision because in situation we have not an access to VERY LOW FREQ and VERY RARE IN THE WORLD white's 27,хх kHz quarth we get white's frequency 6,6 kHz with NO PROBLEM. by the way, we CAN use ALL whites coils on china detectors with 7 kHz coil.