BRN Pi-1 Digital Pi Detector **New** from Turkey

[Mustafa]

Hi Andy,

At that time your site was closed and Clone-PI was a discontinued project.
If you had complained here, I am sure Carl would reacted the same way.


Decompiling Clone-PI was my first attempt. Now I know completely decompiling hex files is possible. Even automatic source recovery software could be written. If you don't want your hex files decompiled I won't decompile publicly but there will be always somebody else doing the same thing.

Best regards,
Mustafa

[Andy_F]

Hi, Mustafa.

As I already wrote, your result was interesting to me (how much it will be similar to the original). No problems. Those who cannot create the device independently are engaged reverse engineering .

Question in why administration reaction in these two cases is various?

[Carl-NC]

Question in why administration reaction in these two cases is various?

I don't monitor everything that gets posted, so usually I only intervene when someone else complains.

- Carl

[Andy_F]

I don't monitor everything that gets posted, so usually I only intervene when someone else complains.

- Carl

ОК.

[Tinkerer]

Hi Andy,

At that time your site was closed and Clone-PI was a discontinued project.
If you had complained here, I am sure Carl would reacted the same way.


Decompiling Clone-PI was my first attempt. Now I know completely decompiling hex files is possible. Even automatic source recovery software could be written. If you don't want your hex files decompiled I won't decompile publicly but there will be always somebody else doing the same thing.

Best regards,
Mustafa

Hi Mustafa,

If I can get a team together to make an "Open Source" design, Discriminating IB-PI, I am going to ask Carl to give us a dedicated forum for it.

I would like to invite you to participate in the team.

Tinkerer

[Tinkerer]

ОК.

Hi Andy_F,
If I can get a team together to make an "Open Source" design, Discriminating IB-PI, I am going to ask Carl to give us a dedicated forum for it.

I would like to invite you to participate in the team.

Tinkerer

[Andy_F]

I would like to invite you to participate in the team.

Thanks. I have projects (not at this forum).

[Mustafa]

Hi Tinkerer,
Count me in.
If there is a team I would like to join.
If there is only you and me, I prefer Closed Source design.
Mustafa

Hi Mustafa,

If I can get a team together to make an "Open Source" design, Discriminating IB-PI, I am going to ask Carl to give us a dedicated forum for it.

I would like to invite you to participate in the team.

Tinkerer

[6666]

This Brn-1 is a few years old, but did anybody make it ? or know how big the coil was ?
thanks
6666

[Luuk]

http://www.geotech1.com/forums/showt...-P%26%23304%3B

here is much more info about the BRN PI posted in 2009

[WM6]

wery low battery expend, just 50mA

l

Respect. Right thing in the flood of nowadays high energetic PI ideas of 500mA of consumption and over.

[jap]

Hi 6666
-Yes i do ,its the easiest and most beautiful projects.
-Has been tested on coil 45cm.
Hi WM6
-Yes just 50mA
its completed project.
best time
j.

[6666]

Hi Jap
thanks for reply, thats a big coil 45cm 24 turns .6mm wire.

Do you know what it was designed to find coins or larger objects.
cheers
6666

[jap]

Hi 6666
-Has been testing on the coils 23cm, 45cm and gives good results with targets small(coins ) and medium(10x10 cm)-Although of its simplicity it is similar in the results with Surf PI,BARACUDA.
-i Not test on the coil up to 45cm.
-it was one of the most beautiful and the most basic of completed projects with LCD and gave good results.
-it has designed an open accept development..
best time
j.

[6666]

Hi Jap
what information do you see on the LCD ?
thanks