Pİ from Samsun

[erolunall]

Hello

I attached A new design pi schema and pcb.

My friend tried it to built and very good pozitif feedbacks.
10 inch coil 1 euro 30 cm. Very stable with ground balance.
http://www.teknolojiekibi.com/yeni/i...p?topic=1952.0
Best wishes
Erol

[vasster]

Interesting schematic

Interesting schematic, with some typos.
Thank you Erol for your contribution.

[DIRCEU]

Hi! EROL

Thanks for posting here.
I would like to try this detector on the beach. May be you have more details about the components values at PCB.

Best Regards

DIRCEU

[erolunall]

Hello

I haven't got more info but This schematic posted here same day with
our forum.A lot of member interested it and waiting information.
I think we will get all needed information in a short time.

Best Wishes
Erol Ünal

[erolunall]

Cyristal=4.096MHz

[DIRCEU]

Hi! EROL

Many thanks for your efforts it is enough to start this project.

Best Regards

DIRCEU

[WM6]

Hi! EROL

Many thanks for your efforts it is enough to start this project.

Best Regards

DIRCEU

Then you surely know quartz data?

[Fred]

Then you surely know quartz data?

Cyristal=4.096MHz

Post #5

[DIRCEU]

Hi EROL!

Have a mistake on 4060 pinout?
Look...




DIRCEU

[WM6]

Cyristal=4.096MHz Post #5

Thanks Fred (I am in changing of glases).

[erolunall]

Hello

I asked for Schematic Errors on our forum .Yes there are some forgotten
drawings on schematic. Not on PCB.But all of them will be corrected in a short term.
I will attach all pictures and Replacement Diagrams for PCB.

Please wait for correct informaion will be here soon.

Best Wİshes
Erol

[DIRCEU]

Hello

I asked for Schematic Errors on our forum .Yes there are some forgotten
drawings on schematic. Not on PCB.But all of them will be corrected in a short term.
I will attach all pictures and Replacement Diagrams for PCB.

Please wait for correct informaion will be here soon.

Best Wİshes
Erol

Hi! EROL

OK! Thanks.

DIRCEU