King Cobra PCB

[kt315]

bottom veiw. 3,6MB. got non-polar 10uF 63V, use them instead 4,7uF too.
http://www.avral.ru/0d423ec087d267a8a61ce60510456fe9

all the best

[eduardo1979]

My PCB King Cobra is ready. Missing wires and some more. I think tomorrow I'm going to hear the voice.

[erdin]

My PCB King Cobra is ready. Missing wires and some more. I think tomorrow I'm going to hear the voice.

Wow, looking good, I cant wait to hear from you when its working

[RelicHunter88]

Great work so far Eduardo!

[Ropcsika]

My PCB King Cobra is ready. Missing wires and some more. I think tomorrow I'm going to hear the voice.

Nice PCB, great work.

[eduardo1979]

Thanks.

[jap]

Hi eduardo1979
Full wishes for the success to complete King Cobra .
best time
j.

[kt315]

nice work Eduardo.
notice, there is not a need of to set a wire jumper, because it was done by printed line.

regards

[eduardo1979]

WAW. The King Cobra works correctly the first test. With the capacitors C7 and C8 not operate the detector. This detector really works. It has 2 nice tones. I encourage you guys that works.

[Ropcsika]

WAW. The King Cobra works correctly the first test. With the capacitors C7 and C8 not operate the detector. This detector really works. It has 2 nice tones. I encourage you guys that works.

Congratulations! Where can i find the full part list?

[RelicHunter88]

Part list here.

http://www.geotech1.com/forums/showt...t=16172&page=5

Something may be missing thought, you better ask kt315 if it is updated.

[Ropcsika]

Part list here.

http://www.geotech1.com/forums/showt...t=16172&page=5

Something may be missing thought, you better ask kt315 if it is updated.

Thanx

[kt315]

Congratulations! Where can i find the full part list?

Part List

[kt315]

Eduardo, good news and my congratulations! You have made it first working

[jap]

Hi kt315
A big thanks to you who work this easing to complete.
best time
j.