Use Pulse Generator to Find Metal

[Mohammed]

Can any body please tell me if I have a seperate Pulse Generator Like this one:

http://www.bkprecision.com/products/...generator.html


What schematic still need to complete Pulse metal detector like Pulse Start or Delta Pulse...

it is emergency Please need to help...


and I am sure if that works will be very deeper than Pulse Star or Delta Pulse

Because it is more stronger in pulse generating.....

[Carl-NC]

This won't make any better PI detector than a 555 oscillator or a PIC micro. You still need a coil switch, and the entire receiver.

- Carl

[Mohammed]

Can you Please give me the schematic of the coil switch and the entire reviver please ....

Please Mr. Carl Help me I need it Emergency ....

Just tell me the way of complete the metal detecting using that Pulse Generator ...

[detectoman]

may be, dell, member de this group has you solution, dear friend, but all' say what detector of dell is an great lie
pulser and dowsing, fatal beat
my sugerence, very powerfull pulser in soil, and an aereo sensitive sistem of reception to coil, wire thiknes, whit semms oscilation resonance, then near of metal increse the reception, needle go to right, and you find the treasure of your grandmother

[Carl-NC]

Can you Please give me the schematic of the coil switch and the entire reviver please

There are plenty of PI detector schematics posted in these forums. Just pick one and go.

[Mohammed]

so Mr. Carl I will not use the pulse generator for any thing in this situation ???

I mean there is no any benefit from it...???

[Carl-NC]

so Mr. Carl I will not use the pulse generator for any thing in this situation ???

I mean there is no any benefit from it...???

The only benefit is if you want to easily change pulse parameters over a wide range. Or if your pulse gen has arbitrary waveform ability. But if all you want is a regular PI detector, then I would go with a regular PI design, and forget using the pulse gen.

- Carl