new pulse hibrid n

[cheurfi habib]

Please make your posts in English.
http://www.geotech1.com/forums/showthread.php?t=10526

Please send me the list of components and complete. schema of this detector (hibrida). sir. receive. my best greetings

[ZOUjiarui]

The drawings of kt315 splicing are missing components

[ZOUjiarui]

[ZOUjiarui]

kt315 is right, sorry

[ZOUjiarui]

Has anyone redrawn his drawings after so many years

[GeoMax]

Hi ZOUJiarui,

Redrawn this schematic? It was done more than 20++++ years ago already... I think the first redrawn circuit poped up 1987 already, longtime before the above circuit was drawn by hand again. Check-out Geotech. Now you might ask what circuit is it and where to find them at Geotech right? Actually if you look closely at the circuit, you will notice that the circuit is an incomplete drawn Whites PI2000/3000 detector circuit with additional LED meter only. Sorry to say... but nothing more. It is also no hybrid detector.

[jfrras]

Please leave the part list of Pulse Star 2 . Or send to my email [email protected]

[Mehranfar]

underside of the PCB 2 star pulse 100 percent correct ,pulse is finally copied the complete star 2 and plotted all four tiles with all components .Strujasu thanks to my friend, the great help on this project.

Hello brother, how are you? Please send me the complete file of this metal detector to my email If you send it, you will help me a lot, thanks
[email protected]

[Orbit]

I would ask everyone who sends me private messages to stop writing to me or on the forum, because I don't share anything with anyone, don't even offer money because I'm not interested. And I'm no one's brother.

[ivconic]

I would ask everyone who sends me private messages to stop writing to me or on the forum, because I don't share anything with anyone, don't even offer money because I'm not interested. And I'm no one's brother.

"Master, brother, teacher, bro" please send me....