Announcement

Collapse
No announcement yet.

new pulse hibrid n

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    It just so this is a multi-pulse ,new detector multi pulse dtv 4.3khz , this detector has nothing to do with the project Nev hybrid n ,hybrid n or how I later christened goldskan6 works at 350hz, the final version.

    Comment


    • #77
      The model in Figure sold but is it working 5 coin as Serbian dinars in the country, between 40 and 47cm Roman coin found on 4ocm in the country ,These are statements from the buyer of the detectors, which I called the ,,multi pulse orbit..

      Comment


      • #78
        I have I finished the second piece iMac video how it works and a look of the unit that is not final .

        Comment


        • #79
          pulse star 2 pcb 1
          Attached Files

          Comment


          • #80
            pcb 2 and pulse star 2 pcb 2
            Attached Files

            Comment


            • #81
              pulse star

              No more secrets ,pulse star ready to transfer downloaded resin details
              Attached Files

              Comment


              • #82
                puls star

                puls star
                Attached Files

                Comment


                • #83
                  puls star

                  puls star
                  Attached Files

                  Comment


                  • #84
                    Good work Orbit when you will have all the numeration of the ic ...etc...you can put the circuit board in gas auto and in one o two month you will have a mint board without epox but also without all color and inscriptions of the ci

                    Comment


                    • #85
                      Thanks Alexisimex .That about a month to two months , entire job will be done pcb, ic circuits, and more.

                      Comment


                      • #86
                        small PCB pulse star 2 without parts
                        Attached Files

                        Comment


                        • #87
                          Hi Orbit
                          You working hard for reverse engineering pulse star 2 !!!! excellent and very good work , but I think you spent more energy without result , because you cannot obtain microcontroller source code !!!!!

                          Comment


                          • #88
                            If he manages to get a microcontroller source code, the question is: is it worth so much effort and wasted time?

                            Comment


                            • #89
                              Unit on last few pics is not uC based, just analog machine (i never see this thing before) and reverse engendering is possible if components are not badly damaged, but will it worth? And epoxy problems sometime can be solved using special dissolver liquid, try to find it at some store selling boat repair kits and chemicals etc, not expensive and usually not make much damage to components.

                              Comment


                              • #90
                                I like challenges, This is all DONE strong hair and plain plastic needle but otherwise this detector does not pick the processor has analog circuits which I normally recorded and all are available to me , example oscillator is modeled with the 4060 cd from it goes counter cd in 4022 and MOSFET etc.

                                Comment

                                Working...
                                X