CHANCE Pcb's Finally Here

[silverdog]

CHANCE Pcb's have finally arrived, delayed by Snow and Christmas Holidays but at last with me.

I only have 20 available so be quick

I haven't built Chance so make no claims for the performance, or even the accuracy of the boards but will support wherever I can

PM me for payment details

1 x $12
2 x $20

postage is $4 Worldwide or $3 to Europe

[turtlebowl]

Chance???

Chance PCB?? Explain please. I just did a search on this site for Chance and come up with 475 entrys. Way to many to figure out what your talking about.
I must assume it is a detector of some sort for home brew and I might be interested but really have no clue what we'er talking about. Please inform me. TB

[Tinkerer]

The Chance PI design is one of the most advanced, or maybe THE most advanced PI design accessible to the public. It is a Russian design by Andy F.
Schematics have been published on the forum. Just look for it.

Tinkerer

[BillBert]

Chance PCB?? Explain please. I just did a search on this site for Chance and come up with 475 entrys. Way to many to figure out what your talking about.
I must assume it is a detector of some sort for home brew and I might be interested but really have no clue what we'er talking about. Please inform me. TB

This may help you out a bit:

http://www.youtube.com/watch?v=EeWAY...eature=related

http://www.youtube.com/watch?v=u63PYxqfyws&translated=1

[silverdog]

Here is the homepage of andy_f the author - you will need to use google translator or something as it is in russian

http://fandy.vov.ru/Chance.htm

[silverdog]

If anyone wants IRF9640's to go with their boards I have some at $1 each

[BillBert]

By chance (no pun intended), did you make a parts list yet? Or should I start poking through the schematic?

Thanks for all your hard work and dedication Silverdog.

[silverdog]

Here is the homepage of andy_f the author - you will need to use google translator or something as it is in russian

http://fandy.vov.ru/Chance.htm

goto the above site and download Chance.pdf

A schematic, partslist, board layout is all in that doc

[BillBert]

goto the above site and download Chance.pdf

A schematic, partslist, board layout is all in that doc

Thank you, that was my bad! I already did that but for some reason, I thought it was only the schematic. I guess when you mentioned you were going to translate it to English, I assumed nothing existed but the schematic.

Thanks again.

[sido]

Hi Silverdog, Am i able to source the atmega chip already pre-programmed from you and if so put me down for 2 x boards, 5 x ic's IRF9640 and atmega x 2 pre programed, at the moment cannot pm you, just signed up, new to forum, have to wait 24 hour's i think?. send me a email message if you can and will discuss it further with you.

Regard's Sido

[silverdog]

Once I have my CHANCE built I will look into supplying pre-programmed Atmega's and possibly kits as well - watch this space

[WM6]

Today I received 3pcs of Chance PCB ordered some days ago.

Very professionally done (even screw hole metalized).

Thank you silverdog, very much for your great work.

[ApBerg]

PCB

Hello Silverdog,

Today I also have received the boards, very good looking

Thanks !

Ap

[Vortxrex]

Hi Andy, I look forward to purchasing whatever "kit" you put together for this. Dave Frank

[m@kedonas]

Dear Friend
I can not send you PM
2 pcb + 4 IRF9640
Send me information
[email protected]