Chance LCD display & parts

[Mudflap]

Any suggestions on a LCD display and interface for the Chance PI. Building off Silverdog's PC board layout.

Also looking for Digikey or similar part number for the headers X1, X2 X3. I believe the 301-021-12, BH-10G and BH-16G are Deka Switchlab (from India) part numbers.

[WM6]

Any suggestions on a LCD display and interface for the Chance PI. Building off Silverdog's PC board layout.

Also looking for Digikey or similar part number for the headers X1, X2 X3. I believe the 301-021-12, BH-10G and BH-16G are Deka Switchlab (from India) part numbers.

As LCD fits any 16 x 2, HD44780 (Hitachi driver) - compatible display.

You do not need to use connector as cited, you can solder flat wire cable directly to board (and at cable your own connector if you wish)

[Mudflap]

As LCD fits any 16 x 2, HD44780 (Hitachi driver) - compatible display.

You do not need to use connector as cited, you can solder flat wire cable directly to board (and at cable your own connector if you wish)

Thanks. I've seen those type displays on eBay.
Good idea on the connectors. Not like I am going to take it apart regularly.