Layout in pdf to actual pcb

[Albie]

Hi all,
How do I get actual size printout from these attached pcb layout pdfs?
The layouts are for Delta Pulse 1 & 2 and Tesoro Golden Sabre.
Please help!

TIA

[Carl-NC]

When you print them from Acrobat, make sure you select "Choose paper source by PDF page size." Be aware that even when you do this, there is no guarantee your printer will scale the printout exactly right.

[Duncan]

Layout in pdf to actual pcb

Albie,
The easiest way to check if the printout is the right size, is to place an actual IC on the printout and see if the IC pins line up with the IC pads on the printout. If they do not line up, then you need to alter the size of the image on your PC before printing. Keep adusting until they line up. These should line up when the IC pad spacings on the printout are exactly 0.1 inch apart. Good luck. Duncan

[Albie]

Thank you Carl for the wonderful tip
Thank you Duncan.

Adios