-120db

[rick]

hi all--


sure is quiet here--randy--on a pi unit no too


much interest it seems---'cept me or maybe others


no speak---start with articals mentioned on erics


site on studies done----do any have to send email


to me/others ???? if no then going get tough....


me now work on vlf getting close to done--then


to pi --my son do bfo--

[Carl]

Re: -120db

Rick,


I've been getting a lot of emails with questions and discussions. I would rather everyone post to the forum so that others can read and respond but so far that's not the case. I will urge emailers to post their messages in the future, get the noise floor up a bit.


I also just added the Stuart microcontroller PI detector and Mark Pauls is writing up his PIC code and a description - I will post it as soon as I get it.


I'm building the final (?) version of my magnetometer this very day. I will write up a report on this design, then move on to a PI detector. Hopefully then I will be more help.


- Carl

[rick]

Re: -120db

hi carl-


thanks responce--almost did same (email) to


randy on pi unit--perhaps people want a more


immediate responce to ?/statements/etc than


a forum provides...seems he want to do a pi


as proscan #2---ok fine--but still have not


heared any say how well proscan works---or


my memory faulty...seems that someone said


a little disapointed--not sure---a lot of guys


respond on many issues and me keep track all----


you keep track on one--me......without go back and


re-read all here and erics too.....maybe another


board is to be specifically at proscan #2/vlf/coils/


finds/etc. to try to localize subject matter a little


closer...anyway -115db----me go do vlf now


check back later


-rick-