Hammerhead as a conveyor metal detector

[nelson]

Hi to all.
I´m wondering if hammerhead or any other PI metal detector, can be use has a conveyor metal detector.
This is intended to detectec small metals on food at a distance of 1 to 3 inches.
So for that i was thinking to use hammerhead or may be another PI MD.
So if anyone can help, i will appreciate it.
Regards
Nelson

[silverdog]

I've seen one on Gary's website

http://www3.telus.net/chemelec/Proje...l-Pictures.htm

look four Maurice from Canada

[nelson]

Hi Silverdog

Yes i had seen that, and also ask Gary about it, but he tool me that for now, there is not a 100% succes.
I also try Whites Surfmaste kit (your kit), and made a small circular coil from computers network cable, 6 turns on a 17 centimeters form, then i connected only 3 wires, 230 uH, 1.6 ohms resistance.
With this coil i got 2 inches for a 1 inch long piece of nail. The problem is also that surfmaster must be in movement to detect it. So may be i will try later with Hammerhead.

A few days ago i request from you 2 more kits.

Best regards and thanks
PD: i m waiting for your new Barracuda kit

Nelson

I've seen one on Gary's website

http://www3.telus.net/chemelec/Proje...l-Pictures.htm

look four Maurice from Canada

[chemelec]

Here is my Conveyer Belt Detector.

http://www3.telus.net/chemelec/Proje...V/Metal-AV.htm

[nelson]

HI GARY
THIS LOOKS NICE. BY THE WAY HAVE YOU MADE ANY FIELD TEST?
I NEED TO DETECT SMALL TARGETS ON MEAT AND CHIKENDS FOR A FRIEND WHO NEED TO CHECK THEY PRODUCTS BEFORE PACKING.
BEST REGARDS TO YOU AND JEANE.
NELSON

Here is my Conveyer Belt Detector.

http://www3.telus.net/chemelec/Proje...V/Metal-AV.htm