Pulse Master Pro - a look inside & some questions

[soverey]

After I read one of Tinkerer's messages on a forum thread ,where he mentioned that a large gold chain gives less signal then a smal gold tooth filling , i changed my test item that was a gold chain whit a ring , and gues what?, it detects it no problem. The chain was about 15 gr. and the ring about 5gr.

[humhum]

Pulse Master Pro under side

Hello dear SOVEREY, how is the name of this IC ?

[kepenekli çoban]

selam

ben türkiyeden katılıyorum kabul ederseniz beni merhaba lar selam

http://www.youtube.com/watch?v=XNG0rR9DXyM

[Qiaozhi]

ben türkiyeden katılıyorum kabul ederseniz beni merhaba lar selam

http://www.youtube.com/watch?v=XNG0rR9DXyM

Please make your posts in English, or provide a translation.
http://www.geotech1.com/forums/showthread.php?t=10526

[mahd313]

hi humhum
i know
plz send full photo in my email
email : [email protected]
i send number ic

[mahd313]

hi humhum
plz chek your email
thanks

[humhum]

hi humhum
plz chek your email
thanks

Hi Mahd313, I also need software for PIC18F2525 Display driver of Pulse Master Pro ,do you have?.


Thanks for your interest or solidarity.

[mahd313]

hi humhum
I sent a number ic to your email
i have not software pic 18f2525 but i can write software for atmel avr
and we should use atmega8 replace the pic18f2525
in (Your photo) is not part of the sound and power supply
plz send full photo to my email
thanks

[humhum]

Software

Hi to all, Need Software PIC18F2525 Display driver for ''Pulse Master Pro''

[SGS]

PIC18F2525 is locked

[mahd313]

1x1m coil information? and photo inside pulse master pro

hi humhum
i have not software pic18f2525, but i am programmer (for pic & atmel microcontroller)
i need schematic pulse master pro for write software pic18f2525
and need information ( coil 36cm ) & ( 1x1m frame ) pulse master pro
wire=?
turns=?
resistance=?
and i write software pic18f2525 for pulse master pro and send for you
sory , bad write english
thanks

[jap]

Hi mahd313
if you failed is simply integrating the electronic circuit of the project hhd ver c + electronic circuit to LCD For presentation and separation of metals like dp2 Turkish ver 2.
And their work mixing + Soft new you can get.(as you say i am programmer for pic & atmel microcontroller)
best time
j.

[humhum]

Hi to All , Please help me with this two parts value R1 and R2 = ? ohm

[iulica]

scheme electronic

i need a scheme of pulse master pro .exist?