MINER-3 (pulsdetektor.de) question

[der_fisherman]

By the way, I am about halfway through the German translation, I am very busy at this time, but if anyone wants a copy of where I am up to now, just ask.

Regards

Andy

[ApBerg]

can anyone here programm an attiny 12 for böses tier 1 or 2
im not able to programm micro controller no hardware and not enough time learn

Hello Bernt,

Just lookt.. I only have now the Attiny 25 an Attiny45.. but if you have time.. and the hex that must go in it.. no problem ..

Best regards.

Ap

[bernte_one]

could send you some attiny12
the hex code is on a pdf also the assembler code
the hex could be transported into a wordpad document then rename the ending from***.txt to ***.hex

seems that you are my hero

[ApBerg]

could send you some attiny12
the hex code is on a pdf also the assembler code
the hex could be transported into a wordpad document then rename the ending from***.txt to ***.hex

seems that you are my hero

Hello Bernd,

Have send you a PM.

Best regards.

Ap