IDX-PRO+VDI

[eduardo1979]

I've also made a small modification in the sensitivity by changing the potentiometer value of 100k for a 10k, annulling the R26 and the positive track potentiometer sensitivity. In this way the detector is gaining a lot of sensitivity and I've also changed the resistance amplitude intervals R7 by a 33-51 Ohms.

[eduardo1979]

The search coils 27cm DD: TX wire from 0.70 to 35 laps - 0.587 mH -1 mF parallel capacitor RX wire from 0.15 to 270 laps - 35.6 mH - 0033 mF parallel capacitor. Rx search coil canceled 1mV.

[eduardo1979]

[strujas]

The search coils 27cm DD: TX wire from 0.70 to 35 laps - 0.587 mH -1 mF parallel capacitor RX wire from 0.15 to 270 laps - 35.6 mH - 0033 mF parallel capacitor. Rx search coil canceled 1mV.

That is inductance for Black max 950 concentric coil. IDX works the best with that coil.
I am asking you how it works outdoor becouse you made a DD coil with same inductance.
I never tried it.

[eduardo1979]

Ok.Is the inductance for Black max 950 concentric coil.

[Wiltran]

IDX

The search coils 27cm DD: TX wire from 0.70 to 35 laps - 0.587 mH -1 mF parallel capacitor RX wire from 0.15 to 270 laps - 35.6 mH - 0033 mF parallel capacitor. Rx search coil canceled 1mV.

Please clarify this:

DD coil
TX coil .70 MM wire thickness,1 mf capacitor replaces what? C21? or ?
RX coil .15 MM wire thickness .0033 mF capacitor replaces what?
Is there a schematic that represents your PCB?
thank you

[eduardo1979]

The capacitors must be put inside the search coil.

[Sean_Goddard]

I WAS WRONG, but it CAN be done uing the X into the Vref method, then there is no need for complex maths. BUT.. I applaud your BRILLIANT solution Holyuser. I have been intending to do the same thing for a LONG time, but never found the time (or inclination).

WELL Done, now about that ACHTUNG MINEN removal.. I would like to license the software off you with a message of MY choice inserted. Please PM me to dicuss payment etc if you are interested.

[Wiltran]

IDX

Holyuser, on the VDI board, what is the value of R2? I am using a 12-13v supply.In other words is PIC pin #2 supposed to read a certain V value? thanks

[holyuser]

You must calculate the value of the resistor so that a fully charged battery at the entrance of the processor (pin 2) is 3.1738 volts, if VDD is exactly 5.000 volts

[holyuser]

I would like to license the software off you with a message of MY choice inserted.

Do you like this? http://www.youtube.com/watch?v=xtTIY6zK35c

[geminis74]

Hi, Random, you are the master

[Qiaozhi]

Do you like this? http://www.youtube.com/watch?v=xtTIY6zK35c

If you don't mind sharing ... how did you get that nice battery indicator symbol on the LCD display?

[Altra]

Qiaozhi,

It's called a custom charactor. Here is one description.

http://www.geocities.com/dinceraydin/lcd/custom.htm

[holyuser]

If you don't mind sharing ... how did you get that nice battery indicator symbol on the LCD display?

I do not mind sharing.
Using PIC-BASIC looks like this:
'********************************
DATA 'Define User Characters into EEPROM
4,4,4,31,4,4,4,4,_ ' CGRAM 0
0,0,12,0,12,0,0,0,_ ' CGRAM 1
14,31,17,17,17,17,17,31,_ ' CGRAM 2
14,31,17,17,17,17,31,31,_ ' CGRAM 3
14,31,17,17,17,31,31,31,_ ' CGRAM 4
14,31,17,17,31,31,31,31,_ ' CGRAM 5
14,31,17,31,31,31,31,31,_ ' CGRAM 6
14,31,31,31,31,31,31,31,_ ' CGRAM 7
'
'
FOR i = 0 to 63 'Loading User Characters into CGRAM
READ i,char
LCDOUT char
NEXT i
'******************************
P.S. The first two symbols are not for battery.