IDX-PRO+VDI

[CDI]

Idx pro does not sound but gives signal in vdi. What could happen

Check BC517/MPSA13 and speaker, i had similar problem, burned 2 speakers.

[onuba]

Thank you cdi Mpsa13 Issuer does not issue

[CDI]

Thank you cdi Mpsa13 Issuer does not issue

[onuba]

CDI Sounds with pinpon pressed if I release it does not ring.. Placed mspa14 instead of mspa13

[onuba]

Solved track cut and mspa burned. Thanks CDI

[CDI]

Solved track cut and mspa burned. Thanks CDI

Anytime...

[CDI]

Solved track cut and mspa burned. Thanks CDI

Anytime...

[seadoggy]

Hello mates!
Do anyone have board VDI lay.file or black and white with back light added at display??
thx and regards.

[Koala]

VDI test - thin gold coin (tremis) vs other thrash objects

Nice job well done. Looks like a great project.

What's the target that comes out at -30

[holyuser]

That is old wrought iron nail.

[Koala]

That is old wrought iron nail.

That's excellent dig plenty of them as the shape often confuses the discrimination along with the square nails that are bent to 90 degrees.


Screen looks really clear also. Are you going to publish the details. How's the screen in direct sunlight.

[holyuser]

There is absolutely no problem in direct sun light.
In this case, the backlight is completely unnecessary and has energy saving.

[scrungy_doolittle]

VDI test - thin gold coin (tremis) vs other thrash objects

NICE, do you have the code for that available? I actually have a couple of those little displays.

[holyuser]

NICE, do you have the code for that available? I actually have a couple of those little displays.

Look at post #3572
here: http://www.geotech1.com/forums/showt...223#post225223

[scrungy_doolittle]

Look at post #3572
here: http://www.geotech1.com/forums/showt...223#post225223

I see you are doing this with one of my favorite processors, the PIC24FJ family. I work on that family a lot. specifcally the PIC24FJ256GB110.
What I was interested in is the source to drive the display. I have a couple of these oled displays and never was able to get them to work with the arduino stuff.