-
-
Tnx CDI.Comment
-
Hello CDI. You have already achieved the TLC 2262cp CI for your UMX2. If you can not tell me where you live (COUNTRY ADDRESS) I try to send you a new sample that you have here in a local electronics store.Comment
-
https://drive.google.com/file/d/1myq...ew?usp=sharing
To help those who are wanting to get started on this project, I leave here the PCB link in black and white EDITED for printing two versions of your choice.Comment
-
Comment
-
https://drive.google.com/open?id=1a3...RNvf7gqKzbHq1s
https://drive.google.com/open?id=1l_...P7gM6V0lzlf1f1
pcb board with tin bond .
see the link.: https://youtu.be/Wg928Gb_PsMComment
-
This is my IDX PRO, made under the EDUARDO scheme.Coil - 27sm -2D https://youtu.be/NkdqAtK_pzsComment
-
Hello to everyone. I want to make DD coil with 32 cm diameter. can you give information about coil wire thickness and number of turns?Comment
-
Hello CDI;
IDX PRO smd pcb thanks for gerber.
works great with a few fixesComment
-
Hi gurdal, good job.
I'm interested in fixes that you applied?
All i know is one bad connection on PCB, is there anything else?Comment
-
ıdx pro test video
Hello friends
idxpro very nice
However, the potentiometer can be mounted on the PCB.
Cables Distress
oscillation
Best regards
Can you draw the pcb together with the potentiometer and other buttons?
Comment
-
I will upload soon fixed pcb. Also, work with old gerber, i just maked small mistake in drawing but nothing special.
One of mistake 39K resistor connection, another mistake is when i placed trimmer for sens.
Nice work gurdal.Comment
-
Fixed and last version.Comment
-
Hello CDI
ıdxpro
How to get rid of potentiometer connection cables
we can follow a path?
I worked a little did not like what I wanted
could you please?
Yours trulyComment
-
Comment
Tweet
Comment