White's V3i

[tragac]

NEW WHITE'S V3I JUST ARRIVED

Please share experience what you have with rest
tuning to search gold nuggets in Europe ,important settings ,which program to use...

max depth.....

THANK YOU IN ADVANCE

REGARDS

[Qiaozhi]

NEW WHITE'S V3I JUST ARRIVED

Please share experience what you have with rest
tuning to search gold nuggets in Europe ,important settings ,which program to use...

max depth.....

THANK YOU IN ADVANCE

REGARDS

Gary did a review of the V3 here ->
http://www.garysdetecting.co.uk/whites_v3_review.htm

What are the differences between the V3 and V3i?

[tragac]

To ALL WITH V3i experience



We make some efforts with HighPro, Nuggets ,Jewelry and Nuggetsand HighTrash to find some gold objects, bath always we had miss riding

Main problem were shells from bullets couple digging without success and One 1.5 V battery in decomposed conditions

Always we have on display same readings like one on this web page [Note: link removed by Admin - points to advertising of free web addresses, and not to Whites Electronics website]
when reading is for gold ring


Please if possible give me some directions to avoid these problems

Or send me settings and which program to use

Thank you in advance for support and help

[satdaveuk]

Gary did a review of the V3 here ->
http://www.garysdetecting.co.uk/whites_v3_review.htm

What are the differences between the V3 and V3i?

Hi Qiaozhi
I havent watched that review by garry yet maybe later but to be quite honest he isnt very good far as hi tech detectors unless there switch on and go programs that are built into the machines.
Give him a 2-3 knob detector and he gives them a pasting and very accurate on his findings wether good or bad, other than that he has nither the time or want to go any further into a detectors real capable properties.
A fine example of that is when he did A review of the DFX, when you get time watch it on utube and give me your opinion, thats on the basis you have owned or used one mind you.
When he is doing reviews of the basic machines he states many times he doesnt like machines with lots of buttons and LCD screens, Hes at his best with machines like the older Tesros Arados, modern Golden mask version 123, similar to me actually although I own DFX, Quattro, 1V, 1265x, TR990D, TGSL, and use them all depending where im going and the mood im in.
All these machine have there quirks good and bad points, which if doing a review you need to do your homework inside and out on every aspect of the kit your reviewing.
I personally thought his review on the DFX was a disgrace, I only pick that machine because I know it well , and far as the recovery test he did.... well any DFX owner go and watch it, then come back here, because you have to agree that the machine had been taken out the box switched on and that was it.
I seen people spend more time setting up there garret ace 250

[Qiaozhi]

Hi Qiaozhi
I havent watched that review by garry yet maybe later but to be quite honest he isnt very good far as hi tech detectors unless there switch on and go programs that are built into the machines.
Give him a 2-3 knob detector and he gives them a pasting and very accurate on his findings wether good or bad, other than that he has nither the time or want to go any further into a detectors real capable properties.
A fine example of that is when he did A review of the DFX, when you get time watch it on utube and give me your opinion, thats on the basis you have owned or used one mind you.
When he is doing reviews of the basic machines he states many times he doesnt like machines with lots of buttons and LCD screens, Hes at his best with machines like the older Tesros Arados, modern Golden mask version 123, similar to me actually although I own DFX, Quattro, 1V, 1265x, TR990D, TGSL, and use them all depending where im going and the mood im in.
All these machine have there quirks good and bad points, which if doing a review you need to do your homework inside and out on every aspect of the kit your reviewing.
I personally thought his review on the DFX was a disgrace, I only pick that machine because I know it well , and far as the recovery test he did.... well any DFX owner go and watch it, then come back here, because you have to agree that the machine had been taken out the box switched on and that was it.
I seen people spend more time setting up there garret ace 250

I don't know Gary, so cannot really comment. Reading the V3 review though, he does seem to struggle with the more complex detectors. However, I could comment on his dowsing link, but will refrain from doing so.

Where is the DFX video? I couldn't find it.

[satdaveuk]

[quote=Qiaozhi;137660]I don't know Gary, so cannot really comment. Reading the V3 review though, he does seem to struggle with the more complex detectors. However, I could comment on his dowsing link, but will refrain from doing so.

Where is the DFX video? I couldn't find it.[/quote

Hi Qiaozhi
just use your search engine for DFX reviews and you should find it.... unless its been removed, that would not suprise me