Announcement

Collapse
No announcement yet.

FET for a GP3000

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • FET for a GP3000

    A friend of mine hooked up a dodgy coil to his GP3000 and the detector went quite.

    It can now detect a car at 1cm, which used to be at least 1m...

    I figure it is the front end FET...

    So I am going to have a poke around and see if I can't fix it.

    Any one know what the FET is for a gp3000?

    Being a chemist I have access to lots of solvents so I am sure I can get the white crud off with something. I reckon that dichloromethane could do it, though I have other more exotic stuff.

    But it would be nice to pre-order the right FET, so does anyone know what that may be?

    Cheers :-)

  • #2
    check through my thread on repairing a GP Extreme. The 3000 may have the same fet. The original fet isn't obtainable anyway - the part number must be unique to Minelab. Still, you could try calling Minelab to see if they'd sell you one.

    Comment

    Working...
    X