FET for a GP3000

[jakub]

A friend of mine hooked up a dodgy coil to his GP3000 and the detector went quite.

It can now detect a car at 1cm, which used to be at least 1m...

I figure it is the front end FET...

So I am going to have a poke around and see if I can't fix it.

Any one know what the FET is for a gp3000?

Being a chemist I have access to lots of solvents so I am sure I can get the white crud off with something. I reckon that dichloromethane could do it, though I have other more exotic stuff.

But it would be nice to pre-order the right FET, so does anyone know what that may be?

Cheers :-)

[bklein]

check through my thread on repairing a GP Extreme. The 3000 may have the same fet. The original fet isn't obtainable anyway - the part number must be unique to Minelab. Still, you could try calling Minelab to see if they'd sell you one.