If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
It looks great found, but is obvious was not deep, from pictures being recognized that surface of target was at about 70-80 Cm from surface of ground. Not considerable depth. My weak PI can easily hit such target at more depth with strong signal.
Essentially except to rare American makers of MDs, other firms MDs can’t hunt at great depths; Whites’, Garrett, Fisher and so on. They should learn from other countries and be embarrassed of making weak detectors.they only change name of their products and give out as new model.
I’m still astonished why they don’t want to improve their products!!!!!!!!!!!
yes but your PI finds all the metal items and you wont be able to distinguish the deep hoard unlike the deepseeker for big items ...
Isn’t that same for TM808????!!!!!!!! It’s also a metal detector which detects all metals especially big sizes. also one PI with big coil frames; 1m x 1m or 2m x 2m eliminates many of small targets. as another side its’ detection is more and more reliable and countable than a two box like TM808.
Comment