3D printed detector

[Tibuck19]

Latest 3d printed box for IDX Pro, I started to use PetG more , which is what i used for this one. it an ok finish, ABS is more forgiving, I laced the inside with Copper tape for EMI shielding. its a little heavy with that bigger speaker and 3 18650's total weight is 390g still not to bad though. All i need to do is get that VDI working and all be all set for spring weather.

Design art:




Finish 3d printed:

[6666]

Latest 3d printed box for IDX Pro, I started to use PetG more , which is what i used for this one. it an ok finish, ABS is more forgiving, I laced the inside with Copper tape for EMI shielding. its a little heavy with that bigger speaker and 3 18650's total weight is 390g still not to bad though. All i need to do is get that VDI working and all be all set for spring weather.

Design art:
[ATTACH]45254[/ATTACH]
[ATTACH]45256[/ATTACH]
[ATTACH]45255[/ATTACH]

Finish 3d printed:
[ATTACH]45257[/ATTACH]
[ATTACH]45258[/ATTACH]
[ATTACH]45259[/ATTACH]
[ATTACH]45260[/ATTACH]
[ATTACH]45261[/ATTACH]
[ATTACH]45262[/ATTACH]

Nice job

N

[Tibuck19]

Nice job

N

Thanks, I am half tempted to remake something like it for the Lobo or TGSL, but, use that conductive pla, just to see if it would provided good RF shielding properties.

[ivconic]

I found that most delicate part to replicate is camlock.
I spent whole day and 5 attempts to get it right.
At the end it turns to be success.
It is not generally applicable because of the specific tube dimensions.