Announcement

Collapse
No announcement yet.

Pile-o-coil shells

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pile-o-coil shells

    It took many months to build the equipment and jigs needed for making coil shells and finally last week I was ready for my first production order. These are 11 and 14 inch concentric shells a customer ordered last week. This was a good test of the equipment and process and I was sweating it I tell you. I mean it all sounds good on paper but how well would everything work in the real world.

    Well as it turns out I flew through this order with nary an issue, pretty cool!


  • #2
    where can i get a 1/4 inch jack plug socket to replace the 1/8 one already in my explorer xs .to update it to the explorer 2 .those 1/8 socket are far two small.it has to be a micro one to fit .any info anyone (i asked minelab they would not supply me with a one.they sent me on a wildgoose chase) thanks minelab.

    asnew555

    Comment


    • #3
      simply buy a 1/8th to 1/4 adapter at any electronics store

      Comment


      • #4
        Or make a short adapter cable. That way it stay flexible.

        Comment

        Working...
        X