Mylar rescue blankets, from where?

[golfnut]

good info keep it coming

Ive seen commercial mono's with a paper sheet top and bottom sprayed in nickel.


With the graphited shell, the coil isnt wrapped in any conductive layers !

The coil turns can 'SEE' the ground surface.. Like this.

Is this what you see..

[golfnut]

I have graphited a shell on the inside.

I see about 20kohm / sq on the surface. used a few fine wires held in with silver loaded paint (for car heated windows)

If the shield is for static E field dissipation - it should be ok


Any other poeple taken stock coils apart?

S

[jwms]

Part of the problem is most of the space blankets use a vapor deposited layer that is only a few hundred atoms thick. Not much of a surface and the reason the resistance is not low. The clean copper wire wrap should work OK as it will give a large surface contact.