If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
DFX schematic shown on the front cover, but it mentions White's XLT inside.
Page 38 – Fig. 4-5 – Off-resonance probe has incorrect pin numbers on IC3. These should be VDD=8, VEE=4, INV=3, NINV=2 and OUT=7. The PCB layout is correct.
Page 100 - First derivative should be dX/dt = Aw cos(wt), and second derivative should be d^2x/dt^2 = -Aw^2 sin(wt).
ITMD is Inside the Metal Detector -- a book about metal detector technology and design. It was written by George Overton and Carl Moreland. Currently there are two editions; the 1st Edition is out-of-print and the 2nd Edition is available for purchase on Amazon.com.