Programing attiny13

[ripsdevala]

Hi,

I attemp to program attiny13 for gnome m, but so far i cant program it, no device found from usbasp, smd and dip version chip using burnomat or other software, direct pin from usbasp or using diy minsys like this one:


Please tell me how

[homefire]

Maybe your using the wrong address ? Use a Arduinio as interface. https://create.arduino.cc/projecthub...ino-uno-afb829

[Toros]

As I recall in this pinpointer used processors ATiny15 and ATiny25

[ripsdevala]

I though it can use a13, i use this

Or i use the wrong pcb?

[Toros]

There is a clone of this pinpointer called Tini13MD. You can find information here: http://www.md4u.ru/viewtopic.php?f=19&t=9700

The author states that pinpoynter is based on Q METER, and Gnomes taken only the basic idea. These are 7 pages in Russian. You should can use Google translator.
Basic information about GnomM is here: http://www.radiodom.org/index/pinpoi...nom_m_quot/0-8

[Toros]

I apologize to Ripsdevala!
The author Gnome has developed a program Tini13. I have not visited those pages and I missed it.

[ripsdevala]

Thanks toros, i think im on the right path.

Maybe your using the wrong address ? Use a Arduinio as interface. https://create.arduino.cc/projecthub...ino-uno-afb829

I have nano, but i have little experience with arduino, im not even sure how to upload hex from arduino.
I see alot video using usbasp, but im failed.

[Toros]

Ripsdevala,
Check pins of transistors. Somewhere along the texts I've read that there is a transistor that must be soldered upside down. I do not remember exactly where I read it, but it is possible that the reason the board you can not work.
Does your computer only USB ports arranged?

[ripsdevala]

I have serial com port, no LPT1

[Toros]

I have serial com port, no LPT1

This is a simple programmer for com port. It is designed for programming ATini2313, but can be processed for ATini13. Use it as a template and do it. It works great with the Pony prog.

[ripsdevala]

Do you mean this one?


Alrwady try that before i have usbasp, its not working

[Toros]

Yes this is the same, but take note that of +5 volts must be submitted by an external source. For example USB port on your computer, battery, or other power supplay.

[ripsdevala]

Yes, and i already do that toros, i have no clue anymore

[Toros]

Remains CPU to be damaged. Do you have another new processor. Fusse bits are not set. They must be such as it is set manufacturer.

[ripsdevala]

Never touch the fuses because cant read or write the fuses. I have one smd and dip, not new, already try program them and fail.