Tweet
I'm looking for minelab explorer coil pinout.Тhanks in advance!
-
-
Pins 1 and 2 go to the top board and pins 3 and 4 go to the bottom board. Pin 5 not used but ground wire from board goes to the shielding. Ive read otherwise that the pins 1,2 and 3,4 go to the opposite boards but thats not how it tests out on my explorer and I took one apart for a mod and it worked this way:
Pin 1 - shielding (top board)
Pin 2 - center conductor (top board)
Pin 3 - shielding (lower board)
Pin 4 - center conductor (lower board)
Pin 5 - not used
black wire from board to shielding.
Comment