Announcement

Collapse
No announcement yet.

Max Gift pack

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Max Gift pack

    thanks alot Max
    by the way i have sent u many MS but but your messate capacity is full
    and Mr Ivconic doesnt respond to my messeges Y? i dont know my by cauz i have sent him too many messages anyway
    Dear Max i have no choise than relaying on you
    so please be patient with me
    1- 8" OO is inner diameter?
    2-is it as deep as your coil in page 105?
    if not please send me printable DD coil diagram for coinshooting if possible
    3-the voltage from the +pole of two 10uf capacitor are different i mean pin2 and pin 6 of LM358 why? please

    i appriciate

  • #2
    Originally posted by metaldetector107 View Post
    thanks alot Max
    by the way i have sent u many MS but but your messate capacity is full
    and Mr Ivconic doesnt respond to my messeges Y? i dont know my by cauz i have sent him too many messages anyway
    Dear Max i have no choise than relaying on you
    so please be patient with me
    1- 8" OO is inner diameter?
    2-is it as deep as your coil in page 105?
    if not please send me printable DD coil diagram for coinshooting if possible
    3-the voltage from the +pole of two 10uf capacitor are different i mean pin2 and pin 6 of LM358 why? please

    i appriciate
    Hi,
    1. 8'' is the diameter of one coil, tx or rx, when you overlap them you get a longer OO that can go deeper than my DD coil but the key is always how the coil is made: it's not easy getting maximum depth from a coil no matter if DD or OO or other, all depends on skills, tools and patience (maybe I forget to mention ... luck, also).
    2. already answered above, depends how you make it, if state of the art you could beat big part of other coils on the market hands down, even 12'' range DD. You can read about nexus and nexus' coils... and performances to have an idea of what I mean. Average OO coils are just average coils, nothing special.
    3. yes it is... it's cause you must use there a bipolar cap (in reality the tesoro's circuit uses real bipolar caps there): when you mount caps that way you get half capacitance so 5uF and unpolarized behaviour , about like the 4.7uF cap of tesoro. If you can find 4.7u caps can use them instead of the two 10uF caps in series.

    Kind regards,
    Max

    Comment

    Working...