Best Coil Cable

[kt315]

your trouble you do not grasp what is VLF cable type is. both couples of wires are in individual
shielding. your microphone one is in GENERAL isolation.

you need : http://www.caledonian-cables.com/pro...ables/8723.jpg

[kt315]

good cable also but i do not know a type. used in fisher tekniks.

[kt315]

[BKY1337]

your trouble you do not grasp what is VLF cable type is. both couples of wires are in individual
isolation. your microphone one is in GENERAL isolation.

you need : http://www.caledonian-cables.com/pro...ables/8723.jpg

I knew that and thats why i asked. I have heard many times that i can use the van damme cables for vlf with only one shield but i wasnt sure. Now i have ordered one, it's too late. I think it will work.

[Koala]

The 5 conductors stands look quite thick. Aren't they more likely to break when flexed ?

isn't foil shielding normally for ridged installations and breaks down when flexed ?

Probably works just fine. But not what I would use after spend the time building the coil.

[Koala]

Genuine Tesoro Cortés cable.

appears to be a fairly cheap and built to a price cable.

[BKY1337]

I have bought a Van Damme Pro Grade Classic Instrument Cable , do you think this is good for Barracuda PI?

It looks like the inner wire is very small.
Has anybody tried this for PI Detectors?

[Koala]

Never tried on a PI most people use a low loss TV cable. It's quite a slow PI I would think it would be fine. I have a board, cable and coil lying around here somewhere I can test if you like. Even TV cable isn't ideal as it's easy to damage the outer casing on sharp rocks.

[BKY1337]

Do you mean the van damme?

[kt315]

The 5 conductors stands look quite thick. Aren't they more likely to break when flexed ?

isn't foil shielding normally for ridged installations and breaks down when flexed ?

Probably works just fine. But not what I would use after spend the time building the coil.

quate thick. LOL. thats the cable using White's company (by the way Whites is company of UK. if you are living in UK
you must know this fact)
take modern chinese cable and you will see WHAT IS real quite thick. and without copper in it!

[Koala]

Yes I have some Van Damme and low loss coaxial cable I can try and see if there is any difference. I very much doubt there will be.

[Koala]

quate thick. LOL. thats the cable using White's company (by the way Whites is company of UK. if you are living in UK
you must know this fact)
take modern chinese cable and you will see WHAT IS real quite thick. and without copper in it!

Been caught out with cheap Chinese cable.

Seemed fine on the bench. Every time it got knocked I a beep. Just tapping the cable was enough.

[kt315]

Been caught out with cheap Chinese cable.

Seemed fine on the bench. Every time it got knocked I a beep. Just tapping the cable was enough.

yup yup. BELDEN IS CHINESE? hey there are you able to mind????
do you have ELFA catalog????? NOT!

[kt315]

Been caught out with cheap Chinese cable.

Seemed fine on the bench. Every time it got knocked I a beep. Just tapping the cable was enough.

do not be so idiotics. look http://www.geotech1.com/forums/album...chmentid=41660

[dbanner]

KT315, your choice of words leaves much to be desired, easily interpreted as insulting, which I know is not your intention. Instead of "idiotic", might I suggest a more a appropriate word such as "duped", example:"do not be so easily duped by cheap chines cable, better advised to get EFPA catalogue as good reference"